Should you cut jerky with or against the grain?

Posted on

Should you cut jerky with or against the grain?

Beef Jerky


Prep time

Cooking time

Total time


Are you wondering if there’s an optimal way to cut your jerky? You’ve likely heard conflicting advice on the best way to slice it, with some saying “with the grain” and others claiming it should be sliced against the grain. Figuring out which one is right can be hard, especially if you’re new to making and eating jerky!

Well, I’m here to help settle this debate once and for all. Having made jerkies with both methods myself (and learning from other experienced jerky makers), I have compiled a comprehensive list of pros and cons for each approach so you can select the best technique for your needs. So stick around as we explore what makes cutting with or against the grain unique – by the end of this article, you’ll know exactly which method works best!

Read also: Should you cut jerky with or against the grain?

Should you cut jerky with or against the grain?

It depends on the type of jerky you’re making. If it’s a thick cut, then cutting against the grain will result in chewier pieces, while cutting with the grain will make for softer and more tender jerky. However, if your jerky is thin sliced, then it’s best to cut with the grain as this will help keep it from becoming too crumbly or falling apart.

How to properly cut meat for jerky

Choosing the Right Meat

Making jerky starts with selecting the right cut of meat. The best cuts for making jerky are lean and contain less fat, as fat can spoil more quickly than other cuts. Look for bottom round, eye of round, flank steak or sirloin tip which all work great when making jerky. When shopping for these cuts look to see that they have a deep red color without any marbling or discoloration. If you’re looking to make turkey jerky then dark-meat turkey is an excellent choice because it contains more moisture than white-meat turkey which makes it easier to preserve.
Trimming the Fat
Once you’ve selected your meat, remove all excess fat from it using a sharp knife before drying. Excess fat can become rancid during processing due to oxidation and bacteria growth so be sure to trim extra pieces off if necessary. Don’t worry about trimming too close; just make sure there is no visible layer of fat on the surface of the trimmed slices.
Now that your meat has been trimmed and prepped for jerky making time its time to slice! Slice against the grain into thin strips (1/4 inch thick). Cut strips in half or thirds depending on how long you desire them – this also allows them to dry faster since thicker strips will take longer than thinner ones do. Trim off any sinewy pieces while slicing as these tend not to dry correctly either. Aim for uniform slices so they’ll cook at even rates in whatever drying method chosen later on in preparation process!

Try experimenting with different cuts and thicknesses when cutting up your beef – you may discover some delicious variations along way that’ll please everyone’s taste buds!

Should you cut jerky with or against the grain?

Read also: what do seaweed chips taste like?

Benefits of cutting jerky with the grain

Paragraph 1:
Cutting jerky with the grain can provide a number of benefits to those who are making and consuming it. It is important to do this in order for the jerky to have an even more pleasant texture, as well as improved flavor. The first benefit that comes from cutting jerky with the grain is that it helps keep the pieces of meat together better when they are cooked and dried. This allows for a more uniform product once everything has been completed, resulting in much better looking slices of jerky. Cutting against the grain would create smaller pieces which could become dryer or chewy at times, depending on how long you cook them for.

Paragraph 2:
Another great benefit from cutting your meat with the grain is that it helps hold onto its natural juices better during cooking and drying processes. Without properly cutting your meat along the grain, all these delicious juices will escape during preparation, greatly reducing its flavorsome properties when being consumed afterwards. If you want to maximize on taste then make sure you cut your meat correctly so that you can get every bit out of its flavor profile! It is also easier to chew through pieces cut with the grain rather than against it due to their longer length – a major plus when trying out new snacks or dinners!

Paragraph 3: Finally, having thin strips and thicker chunks both cut with the same direction makes marinating much easier because all of them will absorb flavors at about the same rate instead if some were going one way while others went another way – which could lead to unevenness in marination time between each piece! We know how important consistency is these days so why not apply this knowledge also when preparing your meats? By simply taking an extra few moments before start prep work on what direction should be used while slicing up food products like jerky really pays off down-the-line by providing an overall greater experience both in terms of visuals/texture as well as taste/flavor!

Benefits of cutting jerky against the grain

One of the biggest benefits to cutting jerky against the grain is a much more tender texture. When cut against the grain, jerky has a softer bite and chew that makes it much easier for people to enjoy. This also helps when eating with someone who may have difficulty chewing or swallowing harder foods. By taking an extra step in preparation, you can provide them with a food that is easy and enjoyable to eat without sacrificing flavor or quality.

Cutting your jerky against the grain also offers a unique flavor experience different from traditional slicing methods. Since each slice of meat is cut perpendicular to its fibers, there is increased exposure for spices and marinades during cooking which results in better absorption by the meat as well as increased flavor throughout each piece. Cutting jerky this way allows you to get more out of your ingredients making every bite packed full of delicious flavors.

Furthermore, cutting your jerkyslices against the grain provides a visually appealing presentation when serving up dishes. Unlike slices cut along their fibers which often appear stringy or tough looking, cross-grain slices look neat and are aesthetically pleasing both on their own as well as arranged amongst other ingredients on plates or platters. The smooth finished edges offer an elegant touch that will make any meal look like it came from five star restaurant kitchen!

Read also: what does red curry paste taste like?


You might also like these recipes